found a share of difficulty lolminer
Two reasons: first, in order for their shares to be valid they have to have the pool set as the recipient, so the mined block already gives the reward to the pool no matter who broadcasts it, and second (as indicated by zanzu) the pool doesn't actually bother giving the whole block out to miners, just a template for the header that contains the Consider a 6 card rig with --dualdevices 4,5 --maxdualimpact 0,0,*,*,*,* Added Ethash kernels for Fermi and Kepler GPUs. Use a comma separated list of values if you want to assign different values for each GPU. (1). Extended crc table for Ethash up until epoch 550. new Nicehash platform), Reduced Zelcash memory usage to 2.9 GBytes. Improvement of Ethash performance (up to 1%) and reduction of stale share rate for Maxwell and Pascal (GTX 10) based GPUs. That said the Navi cards somehow to not like to zombie tuning at all, that is why they only feature the standard zombie mode. Fixed a bug causing a segmentation fault when trying to mine EXCC. Also an example configuration for ETH / ETC card split is provided. A pool operator should set his static diff to a value where every miner can find shares in a reasonable time (lets say every 10 minutes if you have 10MH/s). Fixed a bug with Baffin (RX 450,460, 550, 560) and Tonga (R9 380(X) ) GPUs showing too high hashrate and producing invalids in 1.23 zombie mode. broken fans. Using SHA-256 ( f) as an example, let's say a Mining Pool sets a Share Difficulty of 1,000,000 for the Miner. (1) The new Ergo epochs will increase the size of the data set used for mining by 5% every ~75 days. Minimal temperature for a GPU to start in degree C. If set to 0 disables restart below a fixed temperature. This is default on, so just run the miner with --4g-alloc-size set only to run the zombie mode automatic tuning. When a pool requests a re-connection, the miner will now do so immediately instead of waiting 1 second and no longer say the connection got "lost". This allows running the solvers on more then 8 GPUs with only 4G system memory. At the end it will report the configuration in case you want to use the configuration again. Added Ethash + Alephium dual mining mode analogous to existing Ethash + Ton mode. We are not yet sure why, but we will investigate. Hint: --devices 1,2,4 --cclk 1050,1400,1500 now makes sense, while before --cclk, --lhrtune 0 is now semantically identical to --lhrtune off, Changed handling of user/wallet names containing one or multiple dots. Fixed bug: Miner crashes when mixing TLS and non-TLS pools for fail-over. Speed exposed by API is now smoothed, so especially on all Equihash based algorithms the hashrate figures derived from API values will appear more smooth, Fixed a bug causing Flux mining on Nvidia Pascal GPUs not working. Found a share of difficulty 6.51G Pool not reacting to submitted shares for too long. Added support for mining Alephium in non-dual mode for Nvidia Pascal GPUs and newer. Ethash Ethproxy stratum mode some times loosing worker name. We hope to get this fixed in one of the upcoming versions. Fixed a bug that caused the miner to enter re-connect routine when one endpoint of a Ton - pool did not work, although other endpoints did connect well (That in combination with the previous one was root cause for most Ton errors in Windows we recently had). Improved performance of Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). This is repeated if necessary until a pool remains below the latency limit. Added the Nvidia 3060 "Unlocker" for Linux. Slight improved performance and reduction of stales for Alephium mining on Nvidias. Added detection of pool not accepting worker name in
format when using ETHPROXY stratum. . Please use with care. The default is off for all coins except Beam but on for Beam. lolMiner 1.22 & 1.23 are Linux only releases that targets improvements of the performance of the zombie mode in the Linux specific code. Fixed a bug causing the miner to show a crash message when lolMiner was ended via ctrl+c. Added support for mining Nexa on Nvidia Pascal or newer generation GPUs (1). Range is +/-40. What is a share? Can I find it while mining solo, or only when pool Also when the miner is more then 2 hours stable on its current settings and a lock appears, the card will unlock again, but the tuning will not be reduced. After that an update should be made. In case the script can not be found, an error will be printed and the miner will continue as with --watchdog off. Improved Nexa performance on Nvidia Turing based gpus by approximately 35%+. Note: you either can give one value for the whole rig or provide a comma separated list for each card individually. To continue mining Ergo, please update to this version. epoch change or connection loss. Mixing with 8G cards and do normal mining seems not to be an issue though. (1) Note on watchdog use: When the watchdog script is called the miner will stop working on the other cards. Fixed bug: Cards may crash when switching from ZIL cache back to normal mining. ezil pool), Added support for Ironfish mining (use -a IRONFISH for putting out your rod) for Nvidia Pascal and newer and AMD Vega and newer GPUs. Also see known issues when running multiple cards. Personal note: I am aware many would like to mine Ergo+Zil this will be possible in future versions, but before I am changing some things how ZIL mining works internally - to make it more flexible to be added to other x + Zil configs :). "*" can be used to skip a card. Fee is 0.75%. Pooled mining works by people in the pool trying to find the ultimate hash that is less than the number proscribed by the difficulty. This should fix issues with mining rig rentals and ezil pool. (See note on release page). Nvidia cards that experienced a OpenCL driver error (e.g. Performance increases by 7-11% on epoch 393 (--4g-alloc-size 4080 on a RX 580. Removed: 2G zombie modes for Ergo on AMD cards. How to Set Up the Software for 4GB GPU Mining. Note that a better management with automatic switch to zombie mode is planned in next version. The expected performance on Ampere and Navi GPUs is about 15-20% above common implementations. (a) General tuning tip: The dataset generation of Ergo is more core heavy then e.g. Note on Watchdog use API now also gives the worker name on Ethash, Ton and Alephium mining. Improved Nexa mining performance on all other supported AMD & Nvidia Turing and Ampere gpus by 1.5 - 3% depending on model. Beta feature: Added experimental support for AMD RX7900 series. When doing ZIL make sure --enablezilcache is used on all the LHR cards, because the re-calibration is needed on every hard epoch change. RX 580) while others optimize for more Eth hash rate (e.g. ETP + ZIL), General stability improvements (resolved many potential miner hangs up causes), Changed color scheme in Windows for Ethash mining (new jobs are now white, accepted shares green). GPU 1: Found a share of difficulty 46.24G GPU 1: Share accepted (11 ms) The text was updated successfully, but these errors were encountered: All reactions Copy link . Also 2G cards in zombie mode will see a significant reduction in speed, because the data set is more then 2150 MBytes in size now. Mining Flux, Beam, Equihash 144/5 and Equihash 192/7 will now display the iteration/s (it / s) for easier OC tuning and the pool sol/s calculated from submitted and accepted shares. If only one value is specified, it applies to all connections. Does not fully unlock card, but partially (~3/4 of max performance, +40-45% over locked card). Slightly improved performance of Flux mining on Nvidia Ampere and Turing cards (by approx 1.5-2.5% compared to 1.60). Moved more fee pools to use TLS connection. The total process takes 3-4 minutes total, one with rather low speed and the remaining time with speed closer to the final value. Use --help-format to get an overview of available fields. Added parameter --statsformat to use custom format for the bigger statistic box. Disable the CPU side verification and repair of DAG. This adds a new parameter --tls to control TLS on / off (see manual on usage), Some bugfixes and reworks in the stratum code. A lot of internal re-structuring and fixes. Depending on configuration, the zombie mode now uses 0.5 to 1W less energy and is 0.2 to 0.4 mh/s faster. Use --algo ETCHASH to activate it. Emergency temperature stop (--tmode, --tstart, --stop) now also working for Nvidia GPUs using CUDA. 3080 12GB Results 1.43 Issue #999 Lolliedieb/lolMiner-releases Use --benchmark ETCHASH --benchepoch 390 to benchmark performance post fork. Added a real Cuda back-end for better Nvidia GPU support on Ethash. Fixed zombie tune values not applied when using json format for configuring Fixed a bug causing rejected shares on Equihash not appearing in API (but they did in miner dashboard stats). With this option the miner will call an external script (default path is current working directory and there emergency.sh / .bat), which can be configured with --watchdogscript. The actual improvement depends on the concretely selected dual factor. Added a split DAG mode for Nvidia GPUs in case that the memory allocation fails on the primary kernels. Fixed a bug with invalid shares in Pitcairn Ergo Zombie mode. Two different mining kernels. Also make sure your mining rig is configured to use PCIe-gen 2 connection to your GPUs. Fixed a bug with icemining.ca Ton stratum not sending correct job id when dual mining on AMD cards. (old). Fixed a bug with json style configuration not working with dual mining in 1.43 release version. Default --shortstats interval lowered to 15 seconds, default --longstats interval lowered to 60 seconds, More stable displayed hashrate on Nvidia cards when mining Eth, Changes in Api: On supported algorithms the miner now exposes the number of stale shares in API (stales and defect shares are no longer collapsed into one value), Fixed a bug with processing old style --dualmode etc dualmine settings, Fixed a bug causing a non-realistic high hash rate to be displayed on LHR cards when overclocked after start. Tune value of 2 works for most cards, but some do not like the mode, especially when on PCIe-gen1 riser. https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.9.1hotfix. Miners that do not have a card using the zombie mode can safely ignore this update - it will behave identical to 1.21. (1) Can be higher in case the card was power limited before. I will do better Nvidia codes in the future, but preparing it takes time. Improved Kaspa performance in Kaspa only mining mode by 0.6 to 1.2% on Nvidia GPUs and 0.4-0.5% on AMD (Big) Navi GPUs at approximately same power draw. We set it at 64M for the test pool, which is 136x lower so that we get a lot of shares and don't have to keep the experiment running for months. Fixed a segmentation fault on Nvidia & mixed rigs when starting Ethash mining, Ethash: Reduced power draw significantly on non-zombie mode for Rx Fury & Rx 470 - 590, slight reduction for Vega & Navi, Ethash: Slightly improved performance on Vega, Navi and Nvidia GPUs. lolMiner 1.64: Fastest Kaspa miner in market - bitcointalk.org Also CPU mining in parallel to the new unlocker is untested and might give unexpected results. Are you sure you want to create this branch? Note The list is also documented at, Added reading of current core and memory clocks for AMD and Nvidia GPUs, Slightly improved performance of Ethash on Pascal / Turing & Ampere GPUs (about +0.1 - 0.2 mh per card), Further reduced internal latency in Ethash Cuda back end (less stale shares & CPU load), Added experimental Grin-C32 kernel for Radeon 6700, Fixed a bug in Cuda back-end to crash with a segfault on Epoch change (introduced in 1.25), Fixed a bug that Nvidia-GPUs did not start when Cuda Toolkit was not installed (It reported "No OpenCL devices found " - which was complete nonsense), Fixed some (rare) potential faults in Beam stratum, Windows: Fixed message about Light Cache build time was missing (introduced in 1.25). Recommended values for selected GPUs: Added (tunable) zombie mode kernels for R9 290(x) and R9 295 GPUs - on a popular request. (3) Needs admin / sudo privileges. On most 8G GPUs this will cause the miner to select a smaller dataset table that has only slightly above 2 G. Therefore the alternative version might be a good choice for systems with connected screens or for Nexa / Zil mining using the Zil switching app. So the average consumption can still expected to be rather low. For pool mining, what exactly is a share? Pool configuration for extra connection, Format : Username or wallet address for the extra connection, Password for the extra connection (Optional). The experimental mode for LHR V3 seems to sometimes have unstable when starting up with only a reboot solving it - but after a first successful start it is stable - therefore the option to turn it off if you are struggling to start it up too many times. Removed: Support for mining Ton in single and dual mining modes. Added 2 more epochs on Ergo for 3G AMD GPUs. lolMiner 1.64: Fastest Kaspa miner in market - bitcointalk.org Fixed bug: Miner not calling the default emergency scripts when a GPU was hung up (it only worked with custom scripts), Improved Ethash efficiency on Nvidia GPUs, ZIL cache now can be used by cards with less then 8G when enough memory is available (e.g. Significantly reduced Ethash power draw on Navi GPUs, Slightly improved performance of 6800 (XT) / 6900, Added Cuckoo-29, Cuckaroo-30 CTX, Cuckatoo-31 (MWC) and Cuckatoo-32 (Grin) for RX 6800 family of GPUs. You can also exclude cards from tuning or set their value manually, e.g. Its now sorted by PCIE bus address. Separate worker name for the 2nd connection. Therefore the yesterday released version 1.21 will remain the recent release for Windows. Edit: support for Fiji was broken, A fix can be found here: Ethash & Beam not starting up on Radeon R9 380, Ethash not starting up on some 6G Nvidia cards. 0MH/S After some hours of running! Unlocking & reducing --lhrtune parameter. "*" can be used to skip a card. Linux: Added reading of GPU power draw and core clock on Intel Arc GPUs. (1). for Ethash. Please make sure the script can be executed with the current user rights / does password-less operations. This rig will mine: (1) A big kudos to Flexpool for helping out with this. Slightly changes internal LHR parameters of 3070 ti & 3080 - we hope to improve stability by this plus a small speedup. Miners that do not have a card using the zombie mode can safely ignore this update - it will behave identical to 1.21. lolMiner 1.22 is a Linux only release that targets improvements of the performance of the zombie mode in the Linux specific code. Note that dual mode codes remain unchanged. If this is not wished use --disablewatchdog. (c) In case the miner does not start on older cards, try to increase --keepfree slightly. Note: it may be needed to tune each card individually. Added Nexa echelon mining protocol to support pools using it, e.g. 100% LHR unlock on LHR V1 and V2 GPUs. These will now automatically separate the string at the given position, so the thing after a . Note: Windows version will follow in a few days. Nvidia cards on Ethash now pause when the stratum reports no current work (e.g. Known issues What is Share and the Share Difficulty When You Are Mining at the Default value is 0 (off), for most cards the value of 2 is optimal. This will reduce the switching time for Nicehash & ZIL dual mining significantly. This is recommended option for Nvidia cards. Features: (1) Using Windows and Nvidia Driver 470.05 Beta. Windows release postponed due to incompatibilities with the new performance codes. Full hash rate cards will disable LHR detection latest one minute after --lhrwait has passed. Fixed benchmark mode not starting up when called from json type configuration. The core offset used for the GPUs. On Linux you can use --mclk 810 (but when you change back to an other algorithm you might need to reset this or reboot the rig). The first case restricts restricts your mining to a single pool while the latter might have the disadvantage of a worse ETH mining latency or pool forwarding instabilities. Fee is 1% + 0%. Improved Kaspa performance in ETC and ETHW dual mining by about 6-7% on AMD (Big) Navi GPUs and 10-12% on Nvidia Turing and Ampere, measured at the same Ethash speed. Improved Nexa performance on Nvidia Ada based gpus by approximately 25% on locked memory clock (5000) and about 8% on unlocked memory. In fact. February 14, 2022, 03:37:01 PM Here -1 stands for the cards default, 0 is off, 1 is on. This will be the last release that allows to use the Zombie-Mode in Windows. On some Linux kernels there is a memory leak in the GPU driver component that effects lolMiner quite hard when mining with Navi cards. (1) Note: No responsibility taken for the values set. Temperature to pause or stop a GPU from mining in degree C. If set to 0 disables stop above a fixed temperature. Tuning now uses a scoring function to score resulting Eth and dual coin rewards and try to optimize this. This might solve problems with some pools on connection loss. (all OS), Fixed a bug in Nexa mining of the miner creating only defects (Windows), Fixed a bug in Nexa mining of the miner crashing silently after a few minutes (Windows). Negative values enable parallel generation (default). Added reading of junction temperature on AMD GPUs. Shares are used by miners to monitor their rigs and by pools to distribute rewards amongst their miners. Better performance and less energy use for Radeon VII, Radeon Pro Duo Polaris, Vega Frontier and RX 570 16GByte, Added support for ZelHash (EquihashR 125/4/0) for the hard fork (July 2nd), Fixed a bug with some pool software (e.g. Updated web ui for supporting Intel GPUs, more pools and coins. just on shares on ton eth works good. Added experimental Ethash + Ton dual mining kernels for Nvidia Pascal generation GPUs. Added --zombie-tune parameter for Polaris GPUs. When you solve a share at difficulty 1, you are submitting a solution as if the network difficulty is 1. Ergo: Adjusted all codes mining Autolykos v2 to be ready for the epoch 1 and higher, starting Sunday Nov 7th ~8 am UTC. Member Offline Activity: 90 Merit: 1. To use this you now can use. Added Nvidia memory junction temperature readings on cards that support this, e.g. Added a basic temperature protection mechanism. Cards are separated with a comma. Added support the BEAM hard fork on block 321321 (approx Aug15th). If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established. Fixed a bug that might cause the miner to crash when an Ergo pool connection needs to reconnect. The miner itself will take no further action and continue operation on the remaining cards. Changed default behavior for "." Added support for extra nonce subscription on Ergo stratum - this will cause less reconnects on Nicehash, Fixed an issue causing "invalid" shares on Ethash when the pool makes intensive use of variable difficulty (e.g. When the glitch is detected, the GPUs will leave the special LHR modes automatically. Fixed "Warning: index out of bounds" error when switching from ETHPROXY to ETHV1 stratum mode. Removed 14 cycle fidelity from overview - new C29M solver does not output it properly. NiceHash Rig Manager shows the detailed reason for rejected shares. Since this was the default behavior in previous versions it also is the default. Added 16 GByte solver for Cuckatoo-31 (GRIN). If there is only one miner on the pool, then you can set share difficulty equal to network difficulty. When running multiple Intel Arc GPUs on Beam or Equihash 144/5 the cards will slow down. Core Feature: Complete rework of LHR semi-unlock feature. Ethereum stratum code will now print the pool difficulty in better human readable number, The miner will now print the ip of the connected pool - to be able to detect e.g. : Added ETH / ETC + Kaspa code for Nvidia Pascal based GPUs. Changed the Eth+Ton and Eth+Alephium tuning functions on AMD and all Nvidia non-LHR cards. Fixed a bug that can cause random invalid shared when mining Kaspa on AMD GPUs. (Note that this bug also affected earlier versions of lolMiner - so if it worked fine in last version it can be expected to do so further. Use --tstart to allow a restart of the card below a lower temperature. Fees are equal to Nvidia and AMD GPUs on the corresponding algorithms. Fixed a bug in 1.49 causing Ergo mining not to start on Nvidia GPUs. signs in wallet address when Ton or Aleph dual mining. If so and you get authorization rejected make sure you use --worker instead, Fixed a bug causing LHR unlock not working when too many GPUs needed to perform DAG repair in Aleph dual mining (yea, that is a special case one ), Fixed a bug causing RTX 3050 & RTX 3080 12GB to have extremely low Ethash performance when dual mining, Fixed a bug causing dual mining hash rate on FHR cards not showing up during dual mine calibration in 1.47, Fixed a bug causing --lhrtune off occasionally not to work in 1.47, Added support for LHR unlock in 470.103.01 and all 510.x drivers. (1) (its still not perfect, but way better). We still recommend to not put other load then mining during the calibration phase - after that is finished, the miner is more robust. Note 1: Every code update - in particular when so massive as here - may require re-tuning your oc & uv settings for ideal results and stability.
San Diego State Basketball Assistant Coaches,
Jane Friedman Obituary,
Green Brain Training Hhft,
Articles F
